JBE-2400-I
Addressable Manual Call Point with built-in short-circuit isolator
Front LED indicator
JBE-2400-I is a addresable manual call point (MCP)
designed
to operate on a loop of intelligent fire detection and alarm devices with the
JBE loop protocol.
This MCP sends fire alarm signals to the fire panel when the
resettable element is pressed as defined in the European norm EN 54-11 and EN
54-17.
Resetable element with key tool supplied
After activation, the MCP will remain in alarm until it is reset with the supplied reset key. There is no glass break element in this device, so the reset operation is done without the need to replace any element.
Short-Circuit Isolator
This analogue addressable manual call point integrates an independent short-circuit isolator inside the unit. In case of short-circuit fault on the signal loop L1, L2 of this device, the built-in isolator will automatically cut off the faulty segment and isolate this single call point only, while all other fire devices on the same loop remain in normal communication with the fire control panel
Available plastic cover with reference IF-CFC.
Available backbox with connection terminal allowing easy removal/installation with reference IF-SMP.
Available module protective housing BOX-2102.
EN 54-11 and EN 54-17 certificate.
Technical Documentation MULTILINGUAL
