JBE-2401
Conventional Manual Call Point
Front LED indicator
JBE-2401 is a conventional manual call point (MCP) designed to be compatible with a wide range of conventional fire panels and input modules. This MCP sets an installer-selectable resistive load to the fire loop when its resettable element is pressed.
Resetable element with key tool supplied
After activation, the MCP will remain in alarm until it is reset with the supplied reset key. There is no glass break element in this device, so the reset operation is conveniently done without the need to replace any element.
Built-in auxiliary dry contacts
The JBE-2401 also features a pair of normally open clean (voltage-free) contacts, which close at activation. These can be optionally used for a local action or to provide an activation signal to third party systems.
Selectable alarm resistor through connection terminals.
Available plastic cover with reference IF-CFC.
Available backbox with connection terminal allowing easy removal/installation with reference IF-SMP.
EN 54-11 certificate.
Technical Documentation MULTILINGUAL
